Shop
Showing 13–22 of 22 results
STANDARD CABLE TRAY
A straight section is a length of cable tray that has no change in direction or size.
It can be trucking type or perforated type. The trucking type is a prefabricated metal structure consisting of a one-piece solid bottom channel section used for light current cables.
The perforated type is a prefabricated metal structure consisting of a one-piece solid Ventilated channel section used for light & medium power cables.
TECHNICAL SPECIFICATIONS:
- Standard cable trays are manufactured with the following standards unless otherwise specified:
▪ Standard Length of straight sections = 2, 2.5, 3 meters
▪ Perforated, solid, or combination as a straight section.
▪ Standard Span between supports = 1 meter.
▪ The standard flange profile is (XF) Flat End.
▪ Standard fittings have both bottom & side perforated.
▪ The standard connector is an external flat connector with a mushroom head square neck Bolt M6
▪ Standard C-Shape has a width of 40 mm, and a height of 20 mm, suitable for M8 Connector Bolt
GENERATOR SOUND-PROOF CANOPY
Generator soundproof canopies are used for noise reduction and weather-proofing. Our enclosures are compatible with different types of generators and comply with international environmental regulations.
Technical specifications:
Material: 1.5/ 3mm cold rolled steel
Degree of Protection: IP54
Operation System: 3 Phase 50Hz, 380/200 Vac
Rated KVA: up to 2MVA
Sound Level: 70 dBA @ 1 meters
Vibration-free
Proper ventilation system.
Surface treatment: Electrostatic painted with epoxy-polyester resin
Paint finish: upon request
Specifications
TITLE 1 |
TITLE 2 |
TITLE 3 |
|---|---|---|
| Content 1 1 | Content 1 2 | Content 1 3 |
| Content 2 1 | Content 2 2 | Content 2 3 |
| Content 3 1 | Content 3 2 | Content 3 3 |
ENCLOSURE SYSTEM V-PANO TYPE
Flush sheet steel enclosure vertical arrangement
Technical specifications:
▪ Operation voltage: 230/415 Vac
▪ Rated current: 125A / 250A
▪ Rated frequency: 50/60 Hz
▪ Short-time withstand capacity: 15 KA
▪ Material: Cold rolled sheet steel
▪ Surface treatment: Electrostatic painted with epoxy-polyester resin
▪ Paint finish*: Light gray – RAL 9003
▪ Degree of protection: IP31, IP42
▪ Internal structure: Fishbone Vertical arrangement
▪ Cable entry: Top or Bottom
▪ Door opening angel: 120°
▪ Lock: 1 lift and turn latches Lock with 2 rivet Hinges
▪ User Access: Front
▪ Thickness*: 1 mm
▪ Dimensions*: As per standard
▪ Incomer provision**: Acti9 MCB iC60 / C120 or Compact MCCB CVS / NSX / NSXm (otherwise upon request)
▪ Outgoer provision**: Acit9 MCB 1P or 3P iC60, Acti9 RCBO 1P (otherwise upon request)
| Reference | Width (mm) | Height (mm) | Depth (mm) | No. of Doors | Weight (KG) |
| MAS601604000.9 | 600 | 1600 | 400 | 1 | 83 |
| MAS601804000.9 | 600 | 1800 | 400 | 1 | 94 |
| MAS602004000.9 | 600 | 2000 | 400 | 1 | 45 |
| MAS801203000.9 | 800 | 1200 | 300 | 1 | 51 |
| MAS801402500.9 | 800 | 1400 | 250 | 1 | 57 |
| MAS801403000.9 | 800 | 1400 | 300 | 1 | 58.3 |
| MAS801604000.9 | 800 | 1600 | 400 | 1 | 82 |
| MAS801804000.9 | 800 | 1800 | 400 | 1 | 91 |
| MAS802004000.9 | 800 | 2000 | 400 | 1 | 100.3 |
| MAS1001203000.9 | 1000 | 1200 | 300 | 2 | 62 |
| MAS1001403000.9 | 1000 | 1400 | 300 | 2 | 70.6 |
| MAS1001404000.9 | 1000 | 1400 | 400 | 2 | 87 |
| MAS1001604000.9 | 1000 | 1600 | 400 | 2 | 98.3 |
| MAS1001804000.9 | 1000 | 1800 | 400 | 2 | 109 |
| MAS1002004000.9 | 1000 | 2000 | 400 | 2 | 120 |
| MAS1201604000.9 | 1200 | 1600 | 400 | 2 | 108 |
| MAS1201804000.9 | 1200 | 1800 | 400 | 2 | 120 |
| MAS1202004000.9 | 1200 | 2000 | 400 | 2 | 131 |
| MAS601604000.9 | 600 | 1600 | 400 | 1 | 80 |
OPTICAL NETWORK TERMINAL PANEL – ONT
Enclosures offer an All-In-One Solution for housing various optical network terminal components such as fiber/Cable management, power supply & patch panels. with a unique design that provides a movable slack storage tray allowing universal fit for wide indoor ONT models.
Technical specifications:
▪ Material: Cold rolled sheet steel
▪ Surface treatment: Electrostatic painted with epoxy-polyester resin
▪ Paint finish: Light gray – RAL 9003 (otherwise upon request)
▪ Degree of protection: IP31
▪ Installation: Flush Mounted
▪ Cable entry: Bottom/ Top
▪ User Access: Front
▪ Thickness: 1.25 mm (otherwise upon request)
▪ Dimensions: Customized
MOTOR CONTROL CENTER
Providing suitable protection for running motors is crucial in maintaining both quality of the motor and ensuring the safety of the operator. At MAM, we apply the maximum amount of protectional technology to our motors, in alignment with international safety requirements.MCC is a combination of motor starters, protectional devices and control devices. These motor starters can be either a Classic type such as Direct online “D.O.L”, Star- Delta “Y-Δ”, or a Power electronic type such as Soft Start. Clients may select a motor from a considerable variety according to the rate & application needed. These starters may also be used for controlling the motor speed with the aid of Variable speed drive (VSD) or two-speed starters.
FEEDER PILLAR & COFFRE BOX
Feeder pillars for outdoor residential application compatible with high rapture fuses.
Technical specifications:
▪ Operation voltage: 690 Vac
▪ Rated current: Up to 630A
▪ Rated frequency: 50/60 Hz
▪ Material: Cold rolled sheet steel
▪ Surface treatment: Electrostatic painted with epoxy-polyester resin
▪ Paint finish: Light gray – RAL 7035 (otherwise upon request)
▪ Degree of protection: IP54
▪ Installation: Free Standing
▪ Cable entry: Bottom
▪ Door opening angel: 120°
▪ User Access: Front
▪ Thickness: up to 2 mm (otherwise upon request)
▪ Dimensions: customized
ATS
The nature of loads and electrical sources is determined by the specific
design and manufacturing process of these types of L.V. panels. Furthermore, we always adhere to international standards regarding this type of L.V. panel, including all electrical and mechanical protection regulations. Control circuits are constructed either using classic control circuits or using PLC.
Manual & Automatic Transfer Switch (MTS & ATS)
The transfer switch is used to switch a power supply from its primary source to a backup source. It can be either manual or automatic in sensing a failure or power outage in the primary source. When a primary power system malfunctions, the ATS invokes a standby power source, such as an uninterruptable power supply. An ATS is also capable of fueling long-term backup power systems, such as local diesel generators, to operate electrical equipment until utility power is restored.
| Prisma
– Up to 4000A, Icw=85 KA – From 4 – IEC61439-1&2 – RAl 7047 – IP54 – Sheet Metal |
Special
– Up to 6300A, Icw=85 KA – From 4 – RAl 7035 – IP55 – Sheet Metal / Stainless steel |
Local MAM (MAP)
– Up to 6300A, Icw=85 KA – From 4 – RAl 7035 or upon request – IP54 – Sheet Metal / Stainless steel
|
CONTROL DESK
Control Desks are used to regulate processes remotely in many types of industrial plants and manufacturing units. They come with the necessary protection devices, switches, push buttons, and indicating lights to carry out the desired processes. A control desk may also be equipped with HMI, a Metering Device, or MEMIC to carry out its functions at a more advanced level.
MAM can provide a complete mechanical-electrical solution to fit your requirements.
KWH METER PANEL
MAM KWHM panel offers various Models (Single / three phase meters with miniature / molded case circuit breakers
SOCKET TOWER
Vertical Column Power Sockets are used for power distribution. They can be customized to suit the client’s particular specifications.